Wireless Camcorder Lanc Zoom Controller, Wired Remote Control with 2.5mm Jack Cable, IRIS, Focus, Video Recording and Zoom Commander with Lanc or Remote Terminal for Canon XL1S XL2 XHA1 /Sony NX5C

This wireless remote controls what I need on my Panasonic HC-X1500
The Panasonic HC-X1500 is not on the compatibility list, but this wireless remote controls both zoom and record start’/stop for the Panasonic HC-X1500, and presumably HC-X2000. I haven’t explored any other functions as I don’t need them.My HC-X1500 has a 2.5mm remote jack next to the 3.5mm stereo microphone jack. (Pictures of the HC-X2000 show the same jack cover.) I could find no Panasonic documentation describing use of the remote jack for this camera, so I previously bought a wired remote hoping it would work, and it did. This wireless remote lists many of the same cameras as my wired remote, so I decided to see if it would work. It did for the two functions I need, zoom and video start/stop.This “made” my day! 🙂

Saved Me A Lot of Money and Worked with My Canon VIXIA HF G50
I had a hard time finding a compatible remote for my Canon VIXIA HF G50 4K Camera, they were over $1000 or no longer manufactured. The AODELAN remote control is advertised to be compatible with my model of Canon 4K video camera and they specialize in remotes. I needed a true remote control that affords a long range of untethered freedom for my filming purposes.A CAVEAT: This remote works well if you work with it.The remote did require both included instructions and my Canon manual to tweak or adjust some settings in the camera’s digital menu. For example, I had to go into submenus (on my model camera I had to select RC-V1000 and chose Standard or std). The tiny receiver connects to your camera body (there should be a remote port). The pairing process was simple. Remember to first turn on your camera, then the remote. Sequence matters.The menu window on the remote is small (see photos). You have to choose “menu” and use the + or – buttons to scroll up or down to navigate through the menu. Once the scroll arrow is next to “7. Pair Mode” you’ll have to press the A/M button under IRIS to select it. You’ll then be able to press the red record button to wirelessly start recording, then press it again to stop recording. You can also use the zoom rocker bar at the bottom to toggle right and left to zoom in and out. The + and – buttons on the right of the main remote control the speed. There are 3 speed choices.The plastic is lightweight, and the unit requires 2 AAA batteries (not included). You also want to clamp the device on your tripod handle according to the instructions. The wired connection worked with no issues. You can also tether it if you prefer, and that was the easiest to connect, but for me, wireless is desired and necessary.Overall, this is an inexpensive remote that will help with solo work or long-distance shots. Just be patient with troubleshooting and make sure your camera is compatible.

Only wireless LANC remote zoom controller I’ve found on the market
For the longest time I was looking to see if any manufacturer had a wireless LANC zoom controller for video cameras, and finally I came across this one. I sometimes operate a Steadicam or gimbal, and it’s useful to have a wireless remote zoom controller for the camera so that there’s no cable to throw the rig off balance or get tangled up.The setup menu on this controller is a nice bonus because you can customize the max speed on the zoom controller from 1/8, 4/8, to 8/8 (full speed). The +/- buttons on the left and right allow you to adjust the iris and focus of the camera, which is useful to have control over those things especially when you’re controlling a remote camera that is out of reach.One of the caveats is that when you are in the setup menu, you cannot control the zoom using the remote. All other control functions seem to be suspended while you’re in the menu. If you’re in the middle of a shoot and accidentally hit the menu button, the entire controller will appear to stop responding. But all you need to do is hit the MENU button again to exit the menu and resume operation.The zoom rocker has a wide range of motion to zoom in/out. But it reaches its max speed about 1/2 to 2/3 of the way to either side. There is a rather big dead zone at either end of the zoom rocker where the speed no longer increases. Practically speaking for my style of shooting and zoom control, I prefer to have a smaller range of motion. So it works out fine for me.If you’d like to see this zoom controller in action, check my video.

Je viens de recevoir la télécommande sans fil Lanc Zoom Contrôleur pour la Caméra Canon XL1S XL2.Car j’ai vu sur un avis que celle ci pouvait fonctionner avec la caméra Panasonic X 1500doncJe l’ai acheté et bien sûr elle fonctionne très bien sur ma Caméra Panasonic X 1600Le Zoom et la fonction d’enregistrement fonctionne très bien .La distance entre la télécommande et la caméra peut aller jusqu’à 50 mètresMerci au vendeur 👍👍👍

This wireless remote works very well with my Panasonic HC-X2000 (camera firmware 1.6).Further to the review by Tom Clemans {in the United States) on February 12, 2024 where he reports the remote works with his HC-X1500, I can confirm that all the remote functions work, with the exception of the “Video Playback” (AODELAN term) feature (Panasonic call this Rec Check).The camcorder needs to be in manual mode to activate iris control, otherwise you get an ‘invalid error’ message from the camera, but in manual mode you can open and close the iris.Focus control is good and zoom control is also very smooth. The remote allows differnet settings (e.g. Zoom speed 1 is a single slow zoom, no matter how much the rocker switch is pressed, speed 2 allows faster zoom the more the rocker switch is pressed, and I haven’t tried speed 3 yet). So experiment with the settings for Zoom, Focus and Iris until you find the remote suits your needs.When connected to the camera by a LANC cable the remote receives power from the camera, so no need for AAA batteries to power the remote in wired mode.Remote came with firmware 1.2 and there is mention of checking their site for firmware upgrades, but I would not locate any updates.