WALI Triple Monitor Mount, Three Monitor Desk Mount Fits 13-27in Screens,Holds up to 22lbs, Multiple Monitor Stand with Tilt, Swivel, Rotation, VESA 75×75,100x100mm(M003S), Black

Take your time its worth it
Do not come into this thinking that it is going to be a quick 30 minute Job. If you take the time you can dial this mount in and really make it work wonders for your set up. I have an IKEA desk that has drawers and a metal frame around the desk this made my overall desk height about 5 inches. I had to custom make a bracket out of a 2X4 the screws for the bracket are M6 x1.0 for anyone interested and a simple 1/4×20 bolt and nut can hold the bottom of the clamp to the wood. the directions are easy to follow and the cable management is very nice and can make everything seem as if the cables don’t exist ( I was too lazy to do this so some cables still show. overall for 1/3 the price of bigger competitors it really holds up well. each arm holds 15 pounds and can be adjusted for spring. The monitor on the left weighs 7 pounds but has an additional metal bracket to hold my Mac mini behind it and all the wires. bringing the weight to around 12-13 pounds. No drop or issue with this arm. Great product

Great product but beware if you have curved!
As for the product itself, it’s fantastic and sturdy. I had no issues assembling and everything feels like it will last forever. Only time will tell, but I’m optimistic. I’ve used Wali mounts in the past at work and had no issues, but this is my first for personal use.I have one issue with the hardware and it is the way the monitors connect to the each arm. The VESA mounts, while secure, have quite a bit of wiggle to them. The VESA mount slides onto the metal plate then is secured with a single vertical screw. The screw cannot be made all that tight as it’s made to be hand tightened. The plates themselves are not as tight as they could’ve been. I thought this was strange given the strength and tautness of every facet of the stand. This resulted in a lot of guess work while adjusting. I’d have to overturn because of much the monitor would move before the actual arm would. This isn’t an issue once you have everything where you want it, but does make that process a pain.My second issue, and this is my own fault as I should’ve known from the photos, is how far the center monitor sticks out. This caused me to position all three monitors further forward on my desk than anticipated, resulting in saving a lot less room than anticipated. It’s worth noting that I am using two curved monitors so that also led to them being further forwardNow…the warning for the curved monitor users…I got lucky. I use two 27” curved AOC monitors, and one vertical standard monitor. It was very, very difficult to get the distance I needed for both curved monitors to to angle correctly side by side for a cohesive look. It also restricted the positions I could use as I needed every last inch of extension (including the height portion of the arm to be perfectly straight for the additional distance). I don’t think I would’ve been able to if I had a 3rd curved monitor as well. So, if you have three 27” curved monitors I suggest picking up a mount that supports up to 32” instead for the additional room. Even if you have only have two I would suggest it though you can absolutely make this one work.

Good value
Outer monitors wobble a bit when I press on my desk, but overall these stands have worked well for my setup and are a good value.

Hammer Teil! Bei Befestigung in der durchbohrten Schreibtischplatte sehr standfest! Hätte nicht gedacht, dass das so gut funktioniert.

Materiales duraderos y robustos, a diferencia de otros soportes que he usado este es fácil de instalar, mis tres monitores no se desajustan, puedo acomodarlos en diferentes posiciones y caben mis 3 monitores de 27” sin problema y aún queda sufieciente espacio para maniobrar entre ellos.

Support double écran de qualité.