ErGear Dual Monitor Stand up to 32 inches Screen, Load-Bearing Max 22 lbs Each Arm, Adjustable Dual Monitor Mount, Sturdy Steel vesa Monitor Mount with Stable VESA 75×75 100x100mm

Solid Product
Easy to setup and great value for the money. I set up a 32 inch and 27 inch curved monitors. It came with additional parts to accommodate the curve of the monitors. Adjustable tension to set height and impressive range of motion to set that perfect angle. Solid build quality as well. It really helped to save space, especially for wires since there is built in wire management.

Works well.
Working well. Holding up my samsung monitors. Very adjustable. Not hard to set up. I got a little confused with the screws but it was okay in the end.

Solid product with easy assembly
For what i paid, solid product. Recommend buy.Awesone: material is good quality, adjustable settings is versatile, cord management strong, color (black) is perfect, most of all assembly is really easy (took 10 minutes), has good sturdiness and stable with monitors mounted. I have Dell monitors and it was a perfect fit. Saves so much space on the desk.Bogus: regular price is a bit on the high side, clamp could be a little deeper.

What happens when generative AI is used to make an arm.
The product succeeds at its primary task, it holds up monitors and they do not fall over, or catch on fire. Mission accomplished.The arms are, however, very poorly designed. The cable shroud on the top half is a clip in that is extremely narrow, and may have issues with cables that are thicker. Strangely, the cable shroud on the bottom is actually the full width of the arm, so the sudden switch up of shroud width is very odd. Additionally, the bottom shroud does not use a clipping mechanism like the top shroud, instead it has two screw holes and is screwed in to the arm. This would just stop at being inconvenient, on the counts of requiring you to unscrew/rescrew the shroud in, if it weren’t for the fact that the tunnels through the shrouds severely limit your space to actually put cables through it, AND ARE INACCESSIBLE BECAUSE YOU CAN’T FIT A SCREWDRIVER BETWEEN THE ARM AND YOUR DESK.Mounting brackets for the monitors come with two screw types, a short and long, and spacers. Pretty much every monitor’s screw holes will be the length of the shorter screws; the longer screws in a VESA mount kit are always intended to be used in combination with spacers, in the event that a monitor’s VESA mount points are sunken in to the monitor chassis; this then allows space between the mounting bracket and the actual monitor chassis so the monitor and bracket can be slipped out without actually removing the bracket. But the spacers for the longer screws are not actually long enough! So for monitors where the VESA mount points are sunk into the chassis slightly, you will need to use the shorter screws anyways, which in turn means you won’t be able to attach the bracket then slip it on to the arm, you will need to first connect the upper arm to the bracket, then attach that entire assembly to the monitor. Then you can finally put that entire assembly in to the lower arm, trying your best not to break your now awkward to hold and heavy combo of monitor and arm.2/10, irrefutably designed by the drunken hallucinations of generative AI, because apparently all basic human capacity to think and design things which already exist is completely dead. Can successfully hold monitors, just be extremely careful while assembling and don’t expect it to do literally any other convenience offered by other VESA mounts.

articolo veramente ben fatto, da un senso di solidità e stabilità. anche il design fa la sua parte. soddisfatto dell’acquisto

Stabila, prisvärda och väldigt anpassningsbara