Perlegear Monitor Stand, Freestanding Monitor Mount for 13-34 inch Screens with 360 Degree Rotation, 5 Height Settings, Adjustable Desk Riser with Swivel and Tilt, Max VESA 100x100mm, PGTVS29

Perfect? No, but great for the price.
So I bought this to put on a 32″ TV that I use as a monitor. Of course the little legs that came with the TV provided zero adjustments for height, tilt or swivel. I used it that way by propping up the front of the feet to provide some backwards tilt. I finally got tired of that and decided it was time to buy a proper stand. Now the stands that come with most monitors are generally a little nicer then this one. Normally you can adjust the height by simply pushing it up or down with minimal force and they’ll stay were you leave them. On this guy, you have to remove a bolt and move the monitor bracket up or down a set of slots and replace the bolt. This isn’t an issue for me because I don’t move this monitor around and don’t really need to adjust the monitor height – if you do, this could could be a deal breaker for you. I do occasionally adjust the tilt or swivel and those two things are easily accomplished. BTW, a lot of factory table top monitor stands don’t proved a swivel capability, which this one has. The stand is plenty sturdy and easily supports my 32″ monitor. It came with a pretty good supply of hardware that I suspect will be more then adequate for most installations and it was very simple to assemble. I needed m4x20 screws for my monitor and of course it came with a set that was too short and a set that was too long. It was no big deal to use the supplied spacers with the longer screws to make it work. The next time I’m in a hardware store I’ll either buy a couple nuts so I can thread them on the screws before I cut them shorter and then take them off to straighten out the threads or I’ll simply buy four new screws of the proper length. For the money, I think this is a great little stand, I’d buy another if I needed one.

Absolutely Perfect – I Should Have Purchased This the First Time!
I went with customer recommendations for a previous stand to hold my new 32″ computer monitor – I needed a specific base to fit my desk area so I could place my mouse alongside the right of it. But try as I might, that stand would not support it, even though its advertising claimed it would, but it drooped horribly, and no tightening or realignment of the bolts would work. Browsing on my own for another, I decided to spend another $30 and give the Perlegear stand a try…and boy, WHAT A DIFFERENCE! Perlegear says it would support up to 34″, and my 32″ monitor is now tilted to the upright position that I needed – the other stand failed miserably…and it’s now firmly locked into place. Not only that, Perlegear supplied a whole series of different size screws, spacers, and washers to make sure that their VESA plate could be properly attached to the back of the monitor. The previous stand only came with a couple of different screws, neither of which worked. I had to dig into my box of screws in the garage to get their plate attached. I am LOVING this one! To conclude, if you want a high quality, solid stand that will support up to a 34″ monitor (with CLEAR instructions to assemble it written in English), get this! (In case you want to know which stand to stay away from, it’s this one: https://www.amazon.com/dp/B08TLYNJTB?ref=ppx_yo2ov_dt_b_fed_asin_title)

Excellent, high quality
Excellent, high-quality materials, easy to assemble, and good stand height. The monitor attachment screws should be black.

Poor quality contol
Nice stand , base is chipped! Plastic washer is missing! Poor quality control. Check contents before deciding to keep.