StarTech.com 1U Wall Mount Patch Panel Bracket – 19 in – Steel – Vertical Mounting Bracket for Networking and Data Equipment, TAA (RK119WALLV)
Original price was: €56.€44Current price is: €44.
Price: $55.99 - $43.99
(as of Sep 30, 2025 08:13:19 UTC – Details)
This 1U 19in Steel Vertical Rack and Wall Mountable Server Rack allows equipment (servers routers switches and patch panels) to be mounted flush against the wall saving space and providing the flexibility of a small footprint rack solution.Primary InformationProduct Type : Wall Mount Bracket Width : 20.00 Inch Depth : 2.36 Inch Height : 5.94 Inch UNSPSC CodeUNSPSC Code : 24102001
NO ASSEMBLY REQUIRED: For added convenience, this 1U wall mount patch panel bracket arrives fully assembled with cage screws and nuts for mounting equipment in your data center
BUILT TO LAST: Constructed to EIA-310 19in rack standards, the wall mount bracket features a solid steel design for ultimate durability
VERSATILE FUNCTIONALITY: This multi-use patch panel bracket enables you to mount your server or networking equipment vertically on a wall or horizontally under a desk for added versatility
STANDARDIZED HOLE SIZING: Wall mounting holes are 16 inches center to center for greater stability, and mounting to standard wall studs
Customers say
Customers find the rack mount bracket solidly built and appreciate its high-quality M5 screws. The bracket works well in tight spaces and is easy to install, with customers noting it’s simple to mount devices and comes with mounting screws and nuts. They like its wall mounting capabilities, particularly for 1U rack devices, and one customer mentions it’s perfect for hanging patch panels. While some customers consider it a great value for money, others find it pricey.
13 reviews for StarTech.com 1U Wall Mount Patch Panel Bracket – 19 in – Steel – Vertical Mounting Bracket for Networking and Data Equipment, TAA (RK119WALLV)
Add a review
Related Products
Original price was: €56.€44Current price is: €44.
Steven –
A Space-Saving Solution for My Network Equipment!
The StarTech.com 2U Vertical Wall Mount Patch Panel Bracket has been a game-changer for my home network setup. With limited space available, this steel rack mount bracket provided the perfect solution for mounting my 19″ network, server, and data equipment on the wall, freeing up valuable floor space. The included hardware made the installation process a breeze, and the bracket feels sturdy and reliable, securely holding all my equipment in place. Not only does it keep everything organized and easily accessible, but it also adds a professional touch to my setup. Thanks to this bracket, I can now manage my network components efficiently and keep my workspace clutter-free. If you’re looking to maximize space and keep your network gear well-organized, the StarTech.com 2U Vertical Wall Mount Patch Panel Bracket is definitely worth the investment. Highly recommended!
R. Knowlton –
Excellent for Tight Spaces When You Want to Use Traditional Network Cabinet Equipment
I had limited space in the utility closet in my old house. Going vertical rather than horizontal allowed me to use traditional network cabinet gear without taking up so much horizontal space. I used the following components with the rack and they worked great:Monoprice Keystone Jack Panel, 24 portsCable Matters® 25-Pack Cat6 RJ45 Keystone Jack in White and Keystone Punch-Down StandLeviton 41106-RW6 Voice Grade QuickPort Connector, WhiteTP-LINK TL-SG1016 10/100/1000Mbps 16-Port Gigabit 17.3-inch Rackmountable Switch, 32Gbps CapacityCyberPower PR500LCDRT1U Smart App Sinewave UPS 500VA 400W SNMP/HTTP 1U Rack/TowerNavePoint Cantilever Server Shelf Vented Shelves Rack Mount 19″ 1U Black 8″ (210mm) deepGearIt 10 Pack, Cat 6 Ethernet Cable Cat6 Snagless Patch 1.5 Feet – BlackPros:- Solidly built. Once the 4 wood screws are installed on the sides, there’s little to no flex.- Mounts on standard 16-inch on center wall studs. Note: The rack is 19 3/4 inches wide from outer edge to outer edge.- Nice, slightly textured paint.- Comes with hardware mounting bolts and captive nuts. The bolts have plastic washers so that they don’t scratch the rack paint.- I attached the NavePoint shelf to the studs above the rack to hold my modem and routerCons:- Because all of the ethernet and RG6 cables hang down below the rack, I had to be careful about strain relief, especially where I coiled up extra cable below the rack. The Cable Matters® Cat6 RJ45 Keystone Jacks don’t have a zip tie strain relief slot, so the weight of the cables hangs on the punched down wires. Next time, I’ll use Monoprice Cat6 Punch Down Keystone Jacks (105384) because they have the zip tie slots.
Amazon Customer –
Excellent build and easy to install
Bought this for my studio to mount a rack hardware unit under my desk and it works perfectly! Sturdy build, easy to screw into the bottom of my desk, looks great, and could be used for just about any rack mount use you could think of – nice to have that versatility!
Dave –
Startech offers good mix of price and quality.
Works perfectly to mount rack mount gear on the wall.It seems flimsy when you first open it, but once it’s mounted to the wall with ALL of the supplied screws, it is rock solid. If you have a servers or something that normally needs a 4 post rack then this isn’t the right thing to use (I suppose you could use two of them, but alignment would be tough). This is for 2 post equipment like patch panels, switches, etc.I used them to mount a small stack of Cisco Catalyst and ASA gear, and it works fine.Pro Tip: Make sure your gear is designed to mount in the desired orientation. Cisco for example only allows certain orientations for proper cooling.Came with enough cage nuts to mount (3) 2U pieces of gear, which was a very nice surprise.
Casey –
Very sturdy
This rack is very sturdy. The mounting holes to the wall are a little confusing as 2 of them are off center. The main holes are perfectly aligned on 16″ centers and holding my server without hesitation.
Daecosomoxi –
Rack works well for rack mounted power conditioner/supply
Used this to mount my Tripplite power supply for my studio desk. Works for what I needed it for and itâs just that, has the square holes so youâll need to get rack clips and matching rack bolts to mount your hardware. The Tripplite is not deep in the rack so a horizontal mounting has worked fine.
Carey Bernier –
Great Quality but a Bit Pricey
This rack worked well to mount our home audio system up out of the way. I’ve used StarTech several times in the past and their products are always sturdy and well built. This 6U wall mount is no exception. A bit pricey but significantly less than the big-name brands like APC.
Hardcore Harley –
Lifesaver 2U Mount!
I needed to add a quality CD player to my home studio for playback of my CD collection. Real estate is very limited on my desktop for space so I determined I needed to do an under countertop mount. I looked at a number of 2U rack under mounts, but none of them could support the 9 pound weight of the new CD player. I came across the StarTech 2U mount and it had plenty of strength. Super easy to mount. Lifesaver solution! Highly recommended.
J. Mulligan –
Easy to install, and well made.
Cedric –
Produit conforme au besoin, Ã savoir devoir racker un preamp 1U sur un bureau.la fabrication est robuste et bien fini.
Mollaflex –
Per chi non ha l’esigenza di avere un rack case chiuso, ma vuole tenere in ordine la propria installazione domestica non c’è niente di più pratico.
Robert In Montreal –
Installed upder a shelf, looks great, feels very solid and works perfect.Provided hardware is a nice plus!I should have bought this a long time ago !Would buy again absolutely, actually this would be the first thing that will come to my mind for small racks
L –
Missing cage nuts requires return of complete product and resend a new package.Sending a missing item by mail might be a better option.