Auxbeam 12 Gang Switch Panel RB120 Toggle Momentary Pulsed RGB Dimmable Switch Panel Multifunction Two Sided Output Marine Control Panel IP65 Waterproof for Car Boat RV, 2 Years Warranty
Original price was: €210.€168Current price is: €168.
Price: $209.99 - $167.99
(as of Oct 07, 2025 16:10:45 UTC – Details)
From the brand
Auxbeam LED Switch Panel
Control your world with Auxbeam, power at your fingertips.
We have been committed to producing and manufacturing products that meet customer needs, to relieve customers’ worries and facilitate their daily lives.
Our Car Switch Panels, allows you to control up to 6-12 different auxiliary LED lights or electrical devices at the same time, reducing the trouble of multiple wiring or more switch equipment.
Auxbeam RGB Switch Panel
Auxbeam RGB Switch Panel
Auxbeam 8 Gang Switch Panel
Auxbeam Bluetooth Switch Panel
Switch Panel & Accessories
Auxbeam Switch Accessories
Auxbeam Switch Accessories
Auxbeam Switch Accessories
How does a normal switch panel control 2 or more lights at the same time with one button?
Install the two positive wires of the two work lights into the same “+” hole of the circuit control box at the same time, and also the negative poles, then you can achieve synchronization.
How to connect the ACC Fuse?
1. Connect the red ACC Fuse to the fuse adapter.
2. Open the ACC gear and check whether the ACC fuse in the car is powered.
3. Take out the original car ACC Fuse, insert the fuse adapter, and then reinsert the entire fuse adapter into the original car ACC Fuse position.
Does the switch panel still work when the vehicle is off?
Because the ACC fuse is used to get power, when the car is powered off, the switch system will stop working, and your accessories will also stop working to ensure that the battery will not consume power.
Is there a way that the switch panel can still control the devices in the car when the car is not started?
Please connect the red ACC wire directly to the battery to get power, then you can keep the switch panel powered on all the time. But this is not recommended because it will consume battery power.
Does the ON/OFF button in the middle of the switch panel will start all the devices?
The ON/OFF button is mainly a memory function. The device in use can be fully closed and fully opened with one key through the middle button.
After the car is parked and turned off, the memory function is still valid when the car is started the next day.
How long is the 4 PIN extension cable?
The 4 PIN extension cable is 10 FT long.
After the power restored of my vehicle, does the device turned on too?
Not really, you still need to press the ON/OFF button to restored the accessories. This is designed to the battery can provide enough power to start the car.
Are relays built in?
The 8 gang switch panel has built-in Solid State Relay, just connect the positive and negative wires of the electrical equipment to the 1-8 way wiring ports of the switch to use.
Does it come with relays and fuses?
Yes, there are 6/8 fuses in the relay box, and come with 6 extra.
What if the wires length are not enough? How can i get the extension for it?
Get the extension wire for 8 gang switch panel from this ASIN: B093293RJ7
How can I get more stickers for RA80 XL large switch panel ?
Get the more stickers for RA80 XL switch panel from this ASIN: B0C13FPNP1
Specifications: This professional 12 gang switch panel is designed for DC 12V~24V accessories, with a power range of 1200W~2400W, a working temperature range of -40~221°F, and a maximum current of 100A. Without APP.
Dimmable Settings: The auxiliary switch panel features an auto-sensing dimming function and turn on/off backlight function. The backlight will be dimmer or lighter depending on the environment to reduce visual distraction. You can also press the “mode” button to turn off the backlight during the daytime.
Multifunction: The Auxbeam 12 gang switch panel has 3 utility functions: Toggle (constant light), Momentary (press and hold to turn on, release to turn off), and Pulsed (strobe mode). The memory function retains your settings for quick device access. The RGB function can adjust the panel lights to any color you like. It can better match the color of your car’s interior LED lights or interior decorations, giving you a better visual experience.
Safe Protection: The car switch panel is highly sensitive and stable due to its solid-state relay. It is equipped with a circuit breaker that provides over-voltage protection, reverse polarity protection, over-current protection, and thermal protection. The base of the circuit control box is made thicker and includes thermal conductive strips inside, providing excellent heat dissipation.
Two-Sided Output: The current control box splits the outputs into two sides. This feature allows for more flexible wiring, reduces wire clutter in the engine bay and under the dash.
Widely Use: It is great to control multiple devices with one switch panel! You can add multiple devices to your car, such as lights, exhaust fans, speakers, stereos, etc. It is widely used in RVs, trucks, sports cars, boats, UTVs, ATVs, and more. If you encounter any issues, please feel free to contact us.
2 Years Warranty: Auxbeam Team guarantees a 2-year warranty & 24-hour friendly online service.
Customers say
Customers find the switch panel to be a great product that’s easy to set up and works well, with the ability to program switches to be toggle. They appreciate its versatility, with one customer noting it’s perfect for multiple light bars, and another mentioning it’s ideal for overland and 4×4 vehicles. Customers like its brightness, with one noting it’s not distracting or too bright at night, and they appreciate its cleanliness, with one mentioning how it cleans up buggy wiring.
13 reviews for Auxbeam 12 Gang Switch Panel RB120 Toggle Momentary Pulsed RGB Dimmable Switch Panel Multifunction Two Sided Output Marine Control Panel IP65 Waterproof for Car Boat RV, 2 Years Warranty
Add a review
Related Products
Original price was: €210.€168Current price is: €168.
Joshua Duell –
Great product
Great product for the price, quality is great, easy to install comes with everything you’ll need for install, functions as advertised, looks great. I have a pickup truck so it fit great for me. Will definitely be getting one for most of my vehiclesNote: if you have a bigger truck and depending on where you mount the unit under the hood. You’ll need to get a longer battery cables.
L.Singh –
Great switch.
Works great. Looks great.
Gilberto –
A must for anyone installing up to 8 leds lights or accessories on their vehicle
Could not believe I held off buying this switch box for so long. I’ve installed other switch panels where you have to run power, ground and each individual wire to each accessory and or separate relays from the inside your vehicle cab, it can turn into a “rat nest” of wires quick. With this Auxbeam kit only one wire runs to the inside of the vehicle cab, relays are built-in and the rest of the wires connect into the auxbeam fuse box in the engine compartment, which I find easier to manage the cables than under or behind the dashboard. Also comes with a couple of mounting bracket options, which is a time saver, no need to fab up your own brackets.The features on this kit has are pretty versatile, you can turn your led lights into strobes, steady on, or a momentary switch for a horn. Plus no complicated steps to switch from stobe to stead on, only takes a couple of seconds to switch. Also on this kit you can switch the color on the control panel to almost any color you want.I read other reviews saying that this kit is pretty pricey, but I think with all of the features it comes with it’s worth it, I can see this being installed on a construction vehicle or people that work on the side of the roads that need to have work lights and turn those same work lights to stobes without running any additional modules or switches.I would definitely buy this again in the future when I need to install a bunch of accessories on my vehicle.
Victor –
Works like a dream!
Love this thing!It was easy to wire up with solid instructions!It powers what few aux lights I have. Wish I had more!Holler at me Auxbeam ð Ill slap some of your lights on my Denali!Guess the only thing I wish I had done was get the phone capable one with remote and the 12 gang.
Amber Varney –
Wonderful product
I love my Auxbeam. It has made adding lighting and accessories to my Jeep extremely easy. Installation was straight forward and very simple. The hardest part is figuring out where you want to mount the head unit inside your vehicle.I had an issue with performance and the customer service was phenomenal. They immediately corrected the issue and honored the warranty. We will be purchasing more of their products in the future.
Lonnie Uptegrow –
GREAT UNBOXING….BUUUTTTT!!!
All products in this review were purchased by me at full price and I am not paid by anyone or affiliated with anyone.I’m not one to care about an unboxing experience, but this was quite enjoyable. It felt I found something new with every layer I uncovered. Everything was packaged very well, and in new condition which I would not have expected otherwise. Now I have watched a ton of videos on these types of panels, and use to install 800mhz radios in Pub Safety vehicles in the past, so I am very familiar with these types of units. So far so good…I’m impressed…a very good kit! I’m running Rough Country Ditch Lights, 42 inch 6 mode Auxbeam straight light bar, a pair of 7 inch Auxbeam 6 mod light bars and will soon have 2 3 inch Round Nilight Amber fogs on a license plate bracket. Everything I did is in the pics. Lights installed on a 2019 Jeep Cherokee Trailhawk. I didn’t need Bluetooth although it would have been cool so I have the regular RGB 8 gang switch panel. I did however need the ability to turn the panel off if I wanted. The auto dimming is the only thing I will knock….it should be something you can manually set but you can’t win them all on a budget. I would question waterproofing, but I’m not testing that on a unit I paid my hard earned money for. You can run multimode lights with this panel but you lose a switch to trigger the mode change. With that being said I wish I bought the 12gang…live and learn. I have been using this for several weeks now with no issues. I will suggest that you use wire ferrule to install your leads coming from your lights to get a solid connection. Great kit, great price and I would buy it again!
Lord Vader –
Awesome addition to my UTV
I first discovered this product when watching some videos about adding accessories to my UTV. I didn’t really want to spend the money, but knew that eventually I would, and then need to redo all the wiring for accessories, so instead, a stretched a bit and bought this to go in before the accessories (which had already been purchased).Glad I did, because it works great and makes wiring additional accessories sooooooo much easier.No need to mess with relays and wiring nightmares any more. Simply attach a positive and negative wire to one of the 8 terminals and you’re done. The circuit breaker is added protection and let’s you turn off the entire system, and power to all the accessories, with one switch.Glad I went with this and as it stands right now, my next several accessories should be much easier to wire VS not having this.
Kyle –
Seems like it is built to last
I bought mine for my 2023 Tacoma and it was pretty straight forward to install. The only reason I am putting less than 5 stars is because I do believe the fuses they use for the fuse tap are proprietary as none of the fuses I have work with it which is a bummer.Overall the product seems very well built, and if I had to buy another I most definitely would.
bill p. –
works great
Scott Hounam –
Works exactly how advertisedEasy install and very convenient if planning on adding accessories
grant –
I installed this XL 8 gang Auxbeam panel in my 2008 Jeep JKU. Finding a spot under my crowded engine bay was the most challenging for me. I finally decided on the heavy duty plastic frame beside the battery. (see my picture). I already had most of lights/acc prewired with separate switches, so it was easy to shorten the wires (and remove the old switches) and install into the main fused box. And it was great to only have small wire loom going into the dash area. I installed my switch panel up on the front header, just below the footman loop. I adjusted the lighting to an ice blue colour. I am using 7 of 8 switches. Even though there are blank sticky panel covers, I wish Auxbeam had a couple labels for ” trailer” or “trailer setup”. Other than that, I really like how easy (though it takes time to think it out of what goes where) the install was.
Hayden –
Works amazing way easier way of doing wiring
adrian –
Really good product, fit and finish great, would buy another one that had Bluetooth capabilities.. the one that I got is only RGB through the programmable settings.