VIVO Pneumatic Arm Triple Ultrawide Monitor Extra Tall Desk Mount for Up to 49 inch Screens, Heavy Duty Clamp, Holds 3 Ultra Wides Up to 44 lbs, Black, STAND-V300D
€180
Price: $179.99
(as of Aug 04, 2025 18:00:21 UTC – Details)
From the brand
Electric Desks
Desk Converters
Desk Accessories
Triple Ultrawide Desk Mount: Fits 3 ultra-wide screens (1 up to 49” and 2 up to 38”) with VESA 75x75mm or 100x100mm mounting holes. Holds 4.4 lbs to 44 lbs per arm
Heavy-Duty Cast Aluminum Construction: Clamp base (fits desktops up to 2” thick) and arms are made of premium cast aluminum for maximum strength, scratch resistance, and durability. High-capacity tilt joints accommodate heavier screens without sagging
Screen Articulation: Features +55° to -25° tilt, 180° swivel, and 360° rotation for optimal viewing angles and glare reduction
Pneumatic Height Adjustment: Powerful pneumatic arms counterbalance the weight of your monitors so you can find the ideal screen height at the touch of a hand
Detachable VESA Plates: Mounting your ultra wide monitors is made easier with the detachable VESA plates, and all instructions and hardware are provided for proper assembly
Customers say
Customers find the monitor mount highly functional, with one mentioning it works well even for heavy monitors. The mount is super strong, easy to assemble and install, and customers consider it worth the price. They appreciate its size, with one customer noting it can fit multiple large curved screen displays, and its adaptability, with one highlighting its highly adjustable monitor arms. Customers disagree on the weight of the mount.
13 reviews for VIVO Pneumatic Arm Triple Ultrawide Monitor Extra Tall Desk Mount for Up to 49 inch Screens, Heavy Duty Clamp, Holds 3 Ultra Wides Up to 44 lbs, Black, STAND-V300D
Add a review
Related Products
€180
J.Buras –
Great Mount for Trading Setups
Super strong mount, well built, easy to assemble and works great for my 2 34â extra wide flat monitors and one 32â flat monitor mounted vertical.
B. Anderson –
Greeat dual monitor stand!
Great stand. Easy to put together and adjust. Works exactly like I wanted. Only negative was the screws given to mount to the one monitor were too short. Not the fault of the stand. The back of the monitor was round instead of square, so the plate did not fit into the indent. Other monitor had a square back and fit fine. So again that is a flaw of the monitor, not the stand. Just mentioning it so people know you may need new screws.
Daniel –
Excellent functionality and value
Works very well even for heavy monitors. Used this to mount 2 40 inch ultra wides, along with additional custom mounts. As long as you donât exceed the total weight (which is a lot), it works wonderfully. Mounts very sturdily, even for heavy monitors
Happy –
Good and strong
Works good. Wish it had an extra long arm for 3 monitors horizontal. Really wanted the holding weight with 3 monitors side by side.
Leon M. Porter Jr. –
Great Cost/Quality Choice.
Great build quality, relatively easy to assemble. You’re looking at four 32″ monitors being comfortably supported by this mount.I’ve been looking for the right mount for months and this one showed up recently, and is great balance point of cost to quality.
JR Hickman –
Make sure to go with the drilled mount option for bigger monitors it secures better.
Had it for a couple of months mounted nicely and works as advertised for larger monitors. Good buy in my book.
Erik –
Tall monitor setup
Holds ultra wide monitor steady
David A. Frances –
Functional, but QC could be better
Well, for $150, the quality of this product is pretty disappointing. When considering the positives – the stand certainly holds the weight of my two (2) 49″ curved Samsung monitors stacked on on top of the other. The arms were a bit fiddly to tighten – I was afraid of breaking the tension screw with too much torque, but I was able to tighten them enough to stabilize them. Assembly was very easy, and one person could assemble it and mount the monitors with minimal effort. On to the two (2) negatives: The base consists of a heavy metal plate on the bottom, and a tempered glass base above it. You don’t see the metal base, it’s (mostly) covered by the glass portion. Unfortunately, one would expect that the metal base and the glass base align squarely with each other. That doesn’t happen, and the metal base is out of square by about 1/4 of an inch, so a portion of the metal base extends out from under the glass on the left side. Sort of annoying if you’re a perfectionist. The other issue I have is the arms, while fully articulating, don’t allow you to perfectly align the monitors above each other. For example, the top monitor is about 1″ to the right of the lower monitor. A bit annoying as well. I’ve only had this stand in use for a day, so maybe I’ll get used to it. Given the effort it took to assemble and mount the monitors, as well as rearranging my workstation, I’m going to keep it, but just wanted to share the observation that QC and design could have been better.
TC –
I wish I had purchased this the first time around, it does the job perfectly and reduces so much clutter on my desk.Just be sure you have longer DP or HDMI cables.
Xuan –
Works well holding up two 34 inch curved monitors stacked on top of each other and a curved 32 inch monitor to the side. My cables are a bit short for using the cable management included. The screens can easily be adjusted as needed.
Marcus Nailor –
Working great for a Philips Envia 49″ ultrawide + Dell 27″ (up top) ðInstructions were good, wasn’t a whole lot to work out to be honest. Slide the thing onto the thing and screw the thing to the desk ðProperly solid construction, hasn’t fallen down yet ð¤Bit of a pain to finesse the angles & height (especially). But I got both monitors up, perfect and cable managed within an hour or two, on my own. Just be patient with it and it’s a breeze ð
MYu –
works awesome and feels solid
Christopher Scott –
Simple easy to follow instructions and excellent build quality.